@[toc]

创新互联公司专注为客户提供全方位的互联网综合服务，包含不限于成都网站制作、成都网站设计、外贸营销网站建设、蓬溪网络推广、微信小程序定制开发、蓬溪网络营销、蓬溪企业策划、蓬溪品牌公关、搜索引擎seo、人物专访、企业宣传片、企业代运营等，从售前售中售后，我们都将竭诚为您服务，您的肯定，是我们最大的嘉奖；创新互联公司为所有大学生创业者提供蓬溪建站搭建服务，24小时服务热线：18982081108，官方网址：www.cdcxhl.com

AirFlow 常见问题

安装问题

1、安装出现ERROR “python setup.py xxx” 。

问题：

第一需要你更新 pip 版本需要使用'pip install --upgrade pip' command.

第二是 setuptools 版本太旧，所以出现以下问题Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-G9yO9Z/tldr/，也是需要你更新

File "/tmp/pip-build-G9yO9Z/tldr/setuptools_scm-3.3.3-py2.7.egg/setuptools_scm/integration.py", line 9, in version_keyword
File "/tmp/pip-build-G9yO9Z/tldr/setuptools_scm-3.3.3-py2.7.egg/setuptools_scm/version.py", line 66, in _warn_if_setuptools_outdated
setuptools_scm.version.SetuptoolsOutdatedWarning: your setuptools is too old (<12)

----------------------------------------

Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-G9yO9Z/tldr/
You are using pip version 8.1.2, however version 19.2.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.

##### 解决方法：
> （一）使用“pip install—upgrade pip”命令进行pip版本升级。
>          [xiaokang@localhost ~]$ sudo pip install --upgrade pip
> （二）使用“ pip install --upgrade setuptools”命令进行setuptools 版本升级。
>          [xiaokang@localhost ~]$ sudo pip install --upgrade setuptools
>  解决完以上问题你就可以成功安装上之前要安装的软件了

#### 2、ERROR: Cannot uninstall 'enum34' 。
##### 问题：
```python
        在安装Airflow的时候，出现如下错误：
        ERROR: Cannot uninstall 'enum34'. It is a distutils installed project and thus we cannot accurately determine which files belong to it which would lead to only a partial uninstall.

解决方法：

sudo pip install --ignore-installed enum34
当出现其他无法升级的错误时，可以采用以下命令格式进行强制升级：
   sudo pip install --ignore-installed +模块名

3、安装软件报错，提示软件包找不到

问题：ERROR: Command errored out with exit status 1:

    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-oZ2zgF/flask-appbuilder/setup.py'"'"'; __file__='"'"'/tmp/pip-install-oZ2zgF/flask-appbuilder/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-install-oZ2zgF/flask-appbuilder/pip-egg-info
         cwd: /tmp/pip-install-oZ2zgF/flask-appbuilder/
    Complete output (3 lines):
    /usr/lib64/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'long_description_content_type'
      warnings.warn(msg)
    error in Flask-AppBuilder setup command: 'install_requires' must be a string or list of strings containing valid project/version requirement specifiers
    ----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.

解决方法：

检查安装命令，一般此类问题是因为安装包找不到才会出现的错误。

4、提示找不到Python.h 这个文件或目录

问题：src/spt_python.h:14:20: fatal error: Python.h: No such file or directory

    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-YmiKzY/setproctitle/setup.py'"'"'; __file__='"'"'/tmp/pip-install-YmiKzY/setproctitle/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-XTav9_/install-record.txt --single-version-externally-managed --compile
         cwd: /tmp/pip-install-YmiKzY/setproctitle/
    Complete output (15 lines):
    running install
    running build
    running build_ext
    building 'setproctitle' extension
    creating build
    creating build/temp.linux-x86_64-2.7
    creating build/temp.linux-x86_64-2.7/src
    gcc -pthread -fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv -fPIC -DHAVE_SYS_PRCTL_H=1 -DSPT_VERSION=1.1.10 -I/usr/include/python2.7 -c src/setproctitle.c -o build/temp.linux-x86_64-2.7/src/setproctitle.o
    In file included from src/spt.h:15:0,
                     from src/setproctitle.c:14:
    src/spt_python.h:14:20: fatal error: Python.h: No such file or directory
     #include 
                        ^
    compilation terminated.
    error: command 'gcc' failed with exit status 1
    ----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-YmiKzY/setproctitle/setup.py'"'"'; __file__='"'"'/tmp/pip-install-YmiKzY/setproctitle/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-XTav9_/install-record.txt --single-version-externally-managed --compile Check the logs for full command output.

解决方法：

因为缺少python的开发包，yum install python-devel 安装即可解决

 
 

dag 问题

1、bash_command='/root/touch.sh' 执行命令错误 。

问题：

[2019-12-19 15:15:15,523] {taskinstance.py:1058} ERROR - bash /root/touch.sh
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/airflow/models/taskinstance.py", line 915, in _run_raw_task
    self.render_templates(context=context)
  File "/usr/lib/python2.7/site-packages/airflow/models/taskinstance.py", line 1267, in render_templates
    self.task.render_template_fields(context)
  File "/usr/lib/python2.7/site-packages/airflow/models/baseoperator.py", line 689, in render_template_fields
    self._do_render_template_fields(self, self.template_fields, context, jinja_env, set())
  File "/usr/lib/python2.7/site-packages/airflow/models/baseoperator.py", line 696, in _do_render_template_fields
    rendered_content = self.render_template(content, context, jinja_env, seen_oids)
  File "/usr/lib/python2.7/site-packages/airflow/models/baseoperator.py", line 723, in render_template
    return jinja_env.get_template(content).render(**context)
  File "/usr/lib64/python2.7/site-packages/jinja2/environment.py", line 830, in get_template
    return self._load_template(name, self.make_globals(globals))
  File "/usr/lib64/python2.7/site-packages/jinja2/environment.py", line 804, in _load_template
    template = self.loader.load(self, name, globals)
  File "/usr/lib64/python2.7/site-packages/jinja2/loaders.py", line 113, in load
    source, filename, uptodate = self.get_source(environment, name)
  File "/usr/lib64/python2.7/site-packages/jinja2/loaders.py", line 187, in get_source
    raise TemplateNotFound(template)
TemplateNotFound: bash /root/touch.sh

解决方法：在执行的命令后面多加一个空格

  由于airflow使用了jinja2作为模板引擎导致的一个陷阱，当使用bash命令的时候，尾部必须加一个空格

airflow

1、启动worker 时报错

问题：

Running a worker with superuser privileges when the
worker accepts messages serialized with pickle is a very bad idea!

If you really want to continue then you have to set the C_FORCE_ROOT
environment variable (but please think about this before you do).

解决方法：

在/etc/profile 内添加 export C_FORCE_ROOT="True"

2、airflow怎么批量unpause大量的dag任务

普通少量任务可以通过命令airflow unpause dag_id命令来启动，或者在web界面点击启动按钮实现，但是当任务过多的时候，一个个任务去启动就比较麻烦。其实dag信息是存储在数据库中的，可以通过批量修改数据库信息来达到批量启动dag任务的效果。假如是用MySQL作为sql_alchemy_conn，那么只需要登录airflow数据库，然后更新表dag的is_paused字段为0即可启动dag任务。

示例: update dag set is_paused = 0 where dag_id like "benchmark%";

3、airflow的scheduler进程在执行一个任务后就挂起进入假死状态

出现这个情况的一般原因是scheduler调度器生成了任务，但是无法发布出去。而日志中又没有什么错误信息。

可能原因是Borker连接依赖库没安装：
如果是redis作为broker则执行pip install apache‐airflow[redis]
如果是rabbitmq作为broker则执行pip install apache-airflow[rabbitmq]
还有要排查scheduler节点是否能正常访问rabbitmq。

4、当定义的dag文件过多的时候，airflow的scheduler节点运行效率缓慢

airflow的scheduler默认是起两个线程，可以通过修改配置文件airflow.cfg改进:

[scheduler]
# The scheduler can run multiple threads in parallel to schedule dags.
# This defines how many threads will run.
#默认是2这里改为100
max_threads = 100

5、airflow日志级别更改

vi airflow.cfg

[core]
#logging_level = INFO
logging_level = WARNING

NOTSET < DEBUG < INFO < WARNING < ERROR < CRITICAL
如果把log的级别设置为INFO， 那么小于INFO级别的日志都不输出， 大于等于INFO级别的日志都输出。也就是说，日志级别越高，打印的日志越不详细。默认日志级别为WARNING。
注意: 如果将logging_level改为WARNING或以上级别，则不仅仅是日志，命令行输出明细也会同样受到影响，也只会输出大于等于指定级别的信息，所以如果命令行输出信息不全且系统无错误日志输出，那么说明是日志级别过高导致的。

6、AirFlow: jinja2.exceptions.TemplateNotFound

这是由于airflow使用了jinja2作为模板引擎导致的一个陷阱，当使用bash命令的时候，尾部必须加一个空格:

• Described here : see below. You need to add a space after the script name in cases where you are directly calling a bash scripts in the bash_command attribute of BashOperator - this is because the Airflow tries to apply a Jinja template to it, which will fail.

t2 = BashOperator(
task_id='sleep',
bash_command="/home/batcher/test.sh", // This fails with `Jinja template not found` error
#bash_command="/home/batcher/test.sh ", // This works (has a space after)
dag=dag)

7、AirFlow: Task is not able to be run

任务执行一段时间后突然无法执行，后台worker日志显示如下提示:

[2018-05-25 17:22:05,068] {jobs.py:2508} INFO - Task is not able to be run

查看任务对应的执行日志:

cat /home/py/airflow-home/logs/testBashOperator/print_date/2018-05-25T00:00:00/6.log
...
[2018-05-25 17:22:05,067] {models.py:1190} INFO - Dependencies not met for <TaskInstance: testBashOperator.print_date 2018-05-25 00:00:00 [success]>,
dependency 'Task Instance State' FAILED: Task is in the 'success' state which is not a valid state for execution. The task must be cleared in order to be run.

根据错误提示，说明依赖任务状态失败，针对这种情况有两种解决办法:

使用airflow run运行task的时候指定忽略依赖task:

$ airflow run -A dag_id task_id execution_date

使用命令airflow clear dag_id进行任务清理:

$ airflow clear -u testBashOperator

8、CELERY: PRECONDITION_FAILED - inequivalent arg 'x-expires' for queue 'celery@xxxx.celery.pidbox' in vhost ''在升级celery 4.x以后使用rabbitmq为broker运行任务抛出如下异常:

[2018-06-29 09:32:14,622: CRITICAL/MainProcess] Unrecoverable error: PreconditionFailed(406, "PRECONDITION_FAILED - inequivalent arg 'x-expires' for queue 'celery@PQ
SZ-L01395.celery.pidbox' in vhost '/': received the value '10000' of type 'signedint' but current is none", (50, 10), 'Queue.declare')
Traceback (most recent call last):
    File "c:\programdata\anaconda3\lib\site-packages\celery\worker\worker.py", line 205, in start
self.blueprint.start(self)
.......
    File "c:\programdata\anaconda3\lib\site-packages\amqp\channel.py", line 277, in _on_close
        reply_code, reply_text, (class_id, method_id), ChannelError,
amqp.exceptions.PreconditionFailed: Queue.declare: (406) PRECONDITION_FAILED - inequivalent arg 'x-expires' for queue 'celery@PQSZ-L01395.celery.pidbox' in vhost '/'
: received the value '10000' of type 'signedint' but current is none

出现该错误的原因一般是因为rabbitmq的客户端和服务端参数不一致导致的，将其参数保持一致即可。
比如这里提示是x-expires 对应的celery中的配置是control_queue_expires。因此只需要在配置文件中加上control_queue_expires = None即可。

在celery 3.x中是没有这两项配置的，在4.x中必须保证这两项配置的一致性，不然就会抛出如上的异常。

我这里遇到的了两个rabbitmq的配置与celery配置的映射关系如下表：

rabbitmq	celery4.x
x-expires	control_queue_expires
x-message-ttl	control_queue_ttl

9、CELERY: The AMQP result backend is scheduled for deprecation in version 4.0 and removal in version v5.0.Please use RPC backend or a persistent backend

celery升级到4.x之后运行抛出如下异常:

/anaconda/anaconda3/lib/python3.6/site-packages/celery/backends/amqp.py:67: CPendingDeprecationWarning:
        The AMQP result backend is scheduled for deprecation in version 4.0 and removal in version v5.0. Please use RPC backend or a persistent backend.
    alternative='Please use RPC backend or a persistent backend.')

原因解析:
在celery 4.0中 rabbitmq 配置result_backbend方式变了:
以前是跟broker一样:result_backend = 'amqp://guest:guest@localhost:5672//'
现在对应的是rpc配置:result_backend = 'rpc://'

参考链接:http://docs.celeryproject.org/en/latest/userguide/configuration.html#std:setting-event_queue_prefix

10、CELERY: ValueError('not enough values to unpack (expected 3, got 0)',)

windows上运行celery 4.x抛出以下错误:

[2018-07-02 10:54:17,516: ERROR/MainProcess] Task handler raised error: ValueError('not enough values to unpack (expected 3, got 0)',)
Traceback (most recent call last):
    ......
    tasks, accept, hostname = _loc
ValueError: not enough values to unpack (expected 3, got 0)

celery 4.x暂时不支持windows平台，如果为了调试目的的话，可以通过替换celery的线程池实现以达到在windows平台上运行的目的:

pip install eventlet
celery -A <module> worker -l info -P eventlet

参考链接:
https://stackoverflow.com/questions/45744992/celery-raises-valueerror-not-enough-values-to-unpack
https://blog.csdn.net/qq_30242609/article/details/79047660

11、Airflow: ERROR - 'DisabledBackend' object has no attribute '_get_task_meta_for'

airflow运行中抛出以下异常:

Traceback (most recent call last):
File "/anaconda/anaconda3/lib/python3.6/site-packages/airflow/executors/celery_executor.py", line 83, in sync
......
return self._maybe_set_cache(self.backend.get_task_meta(self.id))
File "/anaconda/anaconda3/lib/python3.6/site-packages/celery/backends/base.py", line 307, in get_task_meta
meta = self._get_task_meta_for(task_id)
AttributeError: 'DisabledBackend' object has no attribute '_get_task_meta_for'
[2018-07-04 10:52:14,746] {celery_executor.py:101} ERROR - Error syncing the celery executor, ignoring it:
[2018-07-04 10:52:14,746] {celery_executor.py:102} ERROR - 'DisabledBackend' object has no attribute '_get_task_meta_for'

这种错误有两种可能原因:

1. CELERY_RESULT_BACKEND属性没有配置或者配置错误;
2. celery版本太低，比如airflow 1.9.0要使用celery4.x，所以检查celery版本，保持版本兼容;

12、airflow.exceptions.AirflowException dag_id could not be found xxxx. Either the dag did not exist or it failed to parse

查看worker日志airflow-worker.err

airflow.exceptions.AirflowException: dag_id could not be found: bmhttp. Either the dag did not exist or it failed to parse.
[2018-07-31 17:37:34,191: ERROR/ForkPoolWorker-6] Task airflow.executors.celery_executor.execute_command[181c78d0-242c-4265-aabe-11d04887f44a] raised unexpected: AirflowException('Celery command failed',)
Traceback (most recent call last):
File "/anaconda/anaconda3/lib/python3.6/site-packages/airflow/executors/celery_executor.py", line 52, in execute_command
subprocess.check_call(command, shell=True)
File "/anaconda/anaconda3/lib/python3.6/subprocess.py", line 291, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'airflow run bmhttp get_op1 2018-07-26T06:28:00 --local -sd /home/ignite/airflow/dags/BenchMark01.py' returned non-zero exit status 1.

通过异常日志中的Command信息得知, 调度节点在生成任务消息的时候同时也指定了要执行的脚本的路径(通过ds参数指定)，也就是说调度节点(scheduler)和工作节点(worker)相应的dag脚本文件必须置于相同的路径下面，不然就会出现以上错误。

参考链接:https://stackoverflow.com/questions/43235130/airflow-dag-id-could-not-be-found

13、airlfow 的 REST API调用返回 Airflow 404 = lots of circles

出现这个错误的原因是因为URL中未提供origin参数，这个参数用于重定向，例如调用airflow的/run接口，可用示例如下所示:

http://localhost:8080/admin/airflow/run?dag_id=example_hello_world_dag&task_id=sleep_task&execution_date=20180807&ignore_all_deps=true&origin=/admin

14、Broker与Executor选择

请务必使用RabbitMQ+CeleryExecutor, 毕竟这个也是Celery官方推荐的做法, 这样就可以使用一些很棒的功能, 比如webui上点击错误的Task然后ReRun

15、pkg_resources.DistributionNotFound: The 'setuptools==0.9.8' distribution was not found and is required by the application

pip install distribution

16、Supervisor

在使用supervisor的启动worker,server,scheduler的时候, 请务必给配置的supervisor任务加上

environment=AIRFLOW_HOME=xxxxxxxxxx

主要原因在于如果你的supervisor是通过调用一个自定义的脚本来运行的, 在启动worker的时候会另外启动一个serve_log服务, 如果没有设置正确的环境变量, serve_log 会在默认的AIRFLOW_HOME里找日志, 导致无法在webui里查看日志

17、Serve_log

如果在多个机器上部署了worker, 那么你需要iptables开启那些机器的8793端口, 这样webui才能查看跨机器worker的任务日志

18、AMPQ库

celery提供了两种库来实现amqp, 一种是默认的kombu, 另外一个是librabbitmq, 后者是对其c模块的绑定, 在1.8.1版本中, 使用的kombu的时候会出现scheduler自动断掉的问题, 这个应该是其对应版本4.0.2的问题, 当切成librabbitmq的时候, server 与 scheduler运行正常, 但是worker的从来不consume任务, 最后查出原因: Celery4.0.2的协议发生了变化但是librabbitmq还没有对应修改, 解决方法是, 修改源码里的 executors/celery_executor.py文件然后加入参数

CELERY_TASK_PROTOCOL = 1

19、RabbitMQ连接卡死

运行一段时间过后, 由于网络问题导致所有任务都在queued状态, 除非把worker重启才能生效, 查资料有人说是clelery的broker pool有问题, 继续给celery_executor.py加入参数

BROKER_POOL_LIMIT=0 //不使用连接池

另外这样只会减少卡死的几率, 最好使用crontab定时重启worker

20、特定任务只在特殊机器上运行

可以给DAG中的task指定一个queue, 然后在特定的机器上运行 airflow worker -q=QUEUE_NAME 即可实现

21、RabbitMQ中的queue数量过多问题

celery为了让scheduler知道每个task的结果并且知道结果的时间为 O(1) , 那么唯一的解决方式就是给每一个任务创建一个UUID的queue, 默认这个queue的过期时间是1天, 可以通过更改celery_executor.py的参数来调节这个过期时间

CELERY_TASK_RESULT_EXPIRES = time in seconds

22、airflow worker 角色不能使用根用户启动

原因：不能用根用户启动的根本原因，在于airflow的worker直接用的celery，而celery 源码中有参数默认不能使用ROOT启动，否则将报错 .

C_FORCE_ROOT = os.environ.get('C_FORCE_ROOT', False)
ROOT_DISALLOWED = """\
Running a worker with superuser privileges when the
worker accepts messages serialized with pickle is a very bad idea!

If you really want to continue then you have to set the C_FORCE_ROOT
environment variable (but please think about this before you do).

User information: uid={uid} euid={euid} gid={gid} egid={egid}
"""

ROOT_DISCOURAGED = """\
You're running the worker with superuser privileges: this is
absolutely not recommended!

Please specify a different user using the --uid option.

User information: uid={uid} euid={euid} gid={gid} egid={egid}
"""

解决方案一：修改airlfow源码，在celery_executor.py中强制设置C_FORCE_ROOT

from celery import Celery, platforms
在app = Celery(…)后新增
platforms.C_FORCE_ROOT = True
重启即可

解决方案二：在容器初始化环境变量的时候，设置C_FORCE_ROOT参数，以零侵入的方式解决问题

强制celery worker运行采用root模式
export C_FORCE_ROOT=True

23、docker in docker

在dags中以docker方式调度任务时，为了container的轻量话，不做重型的docker pull等操作，我们利用了docker cs架构的设计理念，只需要将宿主机的/var/run/docker.sock文件挂载到容器目录下即可 docker in docker 资料 :https://link.zhihu.com/?target=http://wangbaiyuan.cn/docker-in-docker.html#prettyPhoto

24、多个worker节点进行调度反序列化dag执行的时候，报找不到module的错误

当时考虑到文件更新的一致性，采用所有worker统一执行master下发的序列化dag的方案，而不依赖worker节点上实际的dag文件，开启这一特性操作如下

worker节点上： airflow worker -cn=ip@ip -p //-p为开关参数，意思是以master序列化的dag作为执行文件，而不是本地dag目录中的文件
master节点上： airflow scheduler -p

错误原因: 远程的worker节点上不存在实际的dag文件，反序列化的时候对于当时在dag中定义的函数或对象找不到module_name
解决方案一：在所有的worker节点上同时发布dags目录，缺点是dags一致性成问题
解决方案二：修改源码中序列化与反序列化的逻辑，主体思路还是替换掉不存在的module为main。修改如下:

//models.py 文件，对 class DagPickle(Base) 定义修改
import dill
class DagPickle(Base):
id = Column(Integer, primary_key=True)
# 修改前: pickle = Column(PickleType(pickler=dill))
pickle = Column(LargeBinary)
created_dttm = Column(UtcDateTime, default=timezone.utcnow)
pickle_hash = Column(Text)

tablename= "dag_pickle"
def init(self, dag):
self.dag_id = dag.dag_id
if hasattr(dag, 'template_env'):
dag.template_env = None
self.pickle_hash = hash(dag)
raw = dill.dumps(dag)

修改前: self.pickle = dag

reg_str = 'unusualprefix\w*{0}'.format(dag.dag_id)
result = re.sub(str.encode(reg_str), b'main', raw)
self.pickle =result

//cli.py 文件反序列化逻辑 run(args, dag=None) 函数
// 直接通过dill来反序列化二进制文件，而不是通过PickleType 的result_processor做中转
修改前: dag = dag_pickle.pickle
修改后：dag = dill.loads(dag_pickle.pickle)

>  解决方案三：源码零侵入，使用python的types.FunctionType重新创建一个不带module的function，这样序列化与反序列化的时候不会有问题

new_func = types.FunctionType((lambda df: df.iloc[:, 0].size == xx).code, {})

#### 25、在master节点上，通过webserver无法查看远程执行的任务日志
>  原因：由于airflow在master查看task执行日志是通过各个节点的http服务获取的，但是存入task_instance表中的host_name不是ip，可见获取hostname的方式有问题.
>  解决方案：修改airflow/utils/net.py 中get_hostname函数，添加优先获取环境变量中设置的hostname的逻辑
```python
//models.py TaskInstance
self.hostname = get_hostname()
//net.py 在get_hostname里面加入一个获取环境变量的逻辑
import os
def get_hostname():
"""
Fetch the hostname using the callable from the config or using
`socket.getfqdn` as a fallback.
"""
# 尝试获取环境变量
if 'AIRFLOW_HOST_NAME' in os.environ:
return os.environ['AIRFLOW_HOST_NAME']
# First we attempt to fetch the callable path from the config.
try:
callable_path = conf.get('core', 'hostname_callable')
except AirflowConfigException:
callable_path = None

# Then we handle the case when the config is missing or empty. This is the
# default behavior.
if not callable_path:
return socket.getfqdn()

# Since we have a callable path, we try to import and run it next.
module_path, attr_name = callable_path.split(':')
module = importlib.import_module(module_path)
callable = getattr(module, attr_name)
return callable()

当前文章：AirFlow常见问题
标题来源：http://lswzjz.com/article/pedgjd.html