这篇文章主要介绍kubernetes中Master节点如何安装与配置，文中介绍的非常详细，具有一定的参考价值，感兴趣的小伙伴们一定要看完！

小店ssl适用于网站、小程序/APP、API接口等需要进行数据传输应用场景，ssl证书未来市场广阔！成为成都创新互联的ssl证书销售渠道，可以享受市场价格4-6折优惠！如果有意向欢迎电话联系或者加微信：028-86922220（备注：SSL证书合作）期待与您的合作！

一：简介
1.kubernetes master节点包含以下组件：kube-apiserver,kube-scheduler和kube-controller-manager。 这三个组件需要部署在同一台机器上。 同时只能有一个kube-scheduler,kube-controller-manager进程处于工作状态，如果运行多个，则需要通过选举产生一个leader.

2.在/etc/kubernetes/ssl目录下，准备好可能用到的证书文件。
admin-key.pem admin.pem ca-key.pem ca.pem kube-proxy-key.pem，kube-proxy.pem kubernetes-key.pem kubernetes.pem

3.下载安装文件 wget https://storage.googleapis.com/kubernetes-release/release/v1.8.5/kubernetes-server-linux-amd64.tar.gz
tar -xzvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes
tar -xzvf kubernetes-src.tar.gz
复制二进制文件到指定目录
cp -r server/bin/{kube-apiserver,kube-controller-manager,kube-scheduler,kubectl,kube-proxy,kubelet} /usrbin/

二：配置和启动 kube-apiserver

1.service配置文件 /usr/lib/systemd/system/kube-apiserver.service

点击(此处)折叠或打开

1. [Unit]

   
   

2. Description=Kubernetes API Service

   
   

3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes

   
   

4. After=network.target

   
   

5. After=etcd.service

   
   

6. 
   

7. [Service]

   
   

8. EnvironmentFile=-/etc/kubernetes/config

   
   

9. EnvironmentFile=-/etc/kubernetes/apiserver

   
   

10. ExecStart=/usr/bin/kube-apiserver \

    
    

11.          $KUBE_LOGTOSTDERR \

    
    

12.          $KUBE_LOG_LEVEL \

    
    

13.          $KUBE_ETCD_SERVERS \

    
    

14.          $KUBE_API_ADDRESS \

    
    

15.          $KUBE_API_PORT \

    
    

16.          $KUBELET_PORT \

    
    

17.          $KUBE_ALLOW_PRIV \

    
    

18.          $KUBE_SERVICE_ADDRESSES \

    
    

19.          $KUBE_ADMISSION_CONTROL \

    
    

20.          $KUBE_API_ARGS

    
    

21. Restart=on-failure

    
    

22. Type=notify

    
    

23. LimitNOFILE=65536

    
    

24. 
    

25. [Install]

    
    

26. WantedBy=multi-user.target

2.配置文件/etc/kubernetes/config

点击(此处)折叠或打开

1. ###

   
   

2. # kubernetes system config

   
   

3. #

   
   

4. # The following values are used to configure various aspects of all

   
   

5. # kubernetes services, including

   
   

6. #

   
   

7. # kube-apiserver.service

   
   

8. # kube-controller-manager.service

   
   

9. # kube-scheduler.service

   
   

10. # kubelet.service

    
    

11. # kube-proxy.service

    
    

12. 
    

13. # logging to stderr means we get it in the systemd journal

    
    

14. KUBE_LOGTOSTDERR="--logtostderr=true"

    
    

15. 
    

16. # journal message level, 0 is debug

    
    

17. KUBE_LOG_LEVEL="--v=0"

    
    

18. 
    

19. # Should this cluster be allowed to run privileged docker containers

    
    

20. KUBE_ALLOW_PRIV="--allow-privileged=true"

    
    

21. 
    

22. # How the controller-manager, scheduler, and proxy find the apiserver

    
    

23. KUBE_MASTER="--master=http://10.116.137.196:8080"

该配置文件同时被kube-apiserver、kube-controller-manager、kubescheduler、kubelet、kube-proxy使用。

3.配置文件 /etc/kubernetes/apiserver

点击(此处)折叠或打开

1. ###

   
   

2. ## kubernetes system config

   
   

3. ##

   
   

4. ## The following values are used to configure the kube-apiserver

   
   

5. ##

   
   

6. #

   
   

7. ## The address on the local server to listen to.

   
   

8. KUBE_API_ADDRESS="--advertise-address=10.116.137.196 --bind-address=10.116.137.196 --insecure-bind-address=10.116.137.196"

   
   

9. #

   
   

10. ## The port on the local server to listen on.

    
    

11. #KUBE_API_PORT="--port=8080"

    
    

12. #

    
    

13. ## Port minions listen on

    
    

14. #KUBELET_PORT="--kubelet-port=10250"

    
    

15. #

    
    

16. ## Comma separated list of nodes in the etcd cluster

    
    

17. KUBE_ETCD_SERVERS="--etcd-servers=https://10.116.137.196:2379,https://10.116.82.28:2379,https://10.116.36.57:2379"

    
    

18. #

    
    

19. ## Address range to use for services

    
    

20. KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

    
    

21. #

    
    

22. ## default admission control policies

    
    

23. KUBE_ADMISSION_CONTROL="--admission-control=ServiceAccount,NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"

    
    

24. #

    
    

25. ## Add your own!

    
    

26. KUBE_API_ARGS="--authorization-mode=RBAC --runtime-config=rbac.authorization.k8s.io/v1beta1 --kubelet-https=true --experimental-bootstrap-token-auth --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/ssl/kubernetes.pem --tls-private-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --client-ca-file=/etc/kubernetes/ssl/ca.pem --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem --etcd-cafile=/etc/kubernetes/ssl/ca.pem --etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem --etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem --enable-swagger-ui=true --apiserver-count=1 --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/var/lib/audit.log --event-ttl=1h"

a. --authorization-mode=RBAC 指定在安全端口使用 RBAC 授权模式，拒绝未通过授权的请求；

b. kube-scheduler、kube-controller-manager 一般和 kube-apiserver 部署在同一台机器上，它们使非安全端口和 kube-apiserver通信;
kubelet、kube-proxy、kubectl 部署在其它 Node 节点上，如果通过安全端?访问 kube-apiserver，则必须先通过 TLS 证书认证，再通过
RBAC 授权；

c. kube-proxy、kubectl 通过在使?的证书?指定相关的 User、Group来达到通过 RBAC 授权的?的；

d. 如果使用了 kubelet TLS Boostrap 机制，则不能再指定 --kubeletcertificate-authority 、 --kubelet-client-certificate 和 --kubelet-client-key 选项，否则后续 kube-apiserver 校验 kubelet 证
书时出现 ”x509: certificate signed by unknown authority“ 错误；

e. --admission-control 值必须包含 ServiceAccount ；

f. --bind-address 不能为 127.0.0.1 ；

g. runtime-config 配置为 rbac.authorization.k8s.io/v1beta1 ，表示运行时的apiVersion；

h. --service-cluster-ip-range 指定 Service Cluster IP 地址段，该地址段不能路由可达；

i. 缺省情况下 kubernetes 对象保存在 etcd /registry 路径下，可以通过 --etcd-prefix 参数进行调整；

4.启动kube-apiserver

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver

三：配置和启动 kube-controller-manager
1. 服务文件/usr/lib/systemd/system/kube-controller-manager.service

点击(此处)折叠或打开

1. [Unit]

   
   

2. Description=Kubernetes Controller Manager

   
   

3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes

   
   

4. 
   

5. [Service]

   
   

6. EnvironmentFile=-/etc/kubernetes/config

   
   

7. EnvironmentFile=-/etc/kubernetes/controller-manager

   
   

8. ExecStart=/usr/bin/kube-controller-manager \

   
   

9.          $KUBE_LOGTOSTDERR \

   
   

10.          $KUBE_LOG_LEVEL \

    
    

11.          $KUBE_MASTER \

    
    

12.          $KUBE_CONTROLLER_MANAGER_ARGS

    
    

13. Restart=on-failure

    
    

14. LimitNOFILE=65536

    
    

15. [Install]

    
    

16. WantedBy=multi-user.target

2.配置文件 /etc/kubernetes/controller-manager

点击(此处)折叠或打开

1. ###

   
   

2. # The following values are used to configure the kubernetes controller-manager

   
   

3. # defaults from config and apiserver should be adequate

   
   

4. # Add your own!

   
   

5. KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --service-cluster-ip-range=10.254.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem --root-ca-file=/etc/kubernetes/ssl/ca.pem --leader-elect=true"

a. --service-cluster-ip-range 参数指定 Cluster 中 Service 的CIDR范围，该?络在各 Node 间必须路由不可达，必须和 kube-apiserver中的参数一致；

b. --cluster-signing-* 指定的证书和私钥文件用来签名为 TLSBootStrap 创建的证书和私钥；

c. --root-ca-file 用来对 kube-apiserver 证书进行校验，指定该参数后，才会在Pod 容器的 ServiceAccount 中放置该 CA 证书文件；

d. --address 值必须为 127.0.0.1 ，因为当前 kube-apiserver 期望scheduler 和 controller-manager 在同一台机器

3.启动 kube-controller-manager
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager

四：配置和启动 kube-scheduler
1. 服务文件/usr/lib/systemd/system/kube-scheduler.service

点击(此处)折叠或打开

1. [Unit]

   
   

2. Description=Kubernetes Scheduler Plugin

   
   

3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes

   
   

4. 
   

5. [Service]

   
   

6. EnvironmentFile=-/etc/kubernetes/config

   
   

7. EnvironmentFile=-/etc/kubernetes/scheduler

   
   

8. ExecStart=/usr/bin/kube-scheduler \

   
   

9.     $KUBE_LOGTOSTDERR \

   
   

10.     $KUBE_LOG_LEVEL \

    
    

11.     $KUBE_MASTER \

    
    

12.     $KUBE_SCHEDULER_ARGS

    
    

13. Restart=on-failure

    
    

14. LimitNOFILE=65536

    
    

15. 
    

16. [Install]

    
    

17. WantedBy=multi-user.target

2. 配置文件/etc/kubernetes/scheduler

点击(此处)折叠或打开

1. ###

   
   

2. # kubernetes scheduler config

   
   

3. # default config should be adequate

   
   

4. # Add your own!

   
   

5. KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"

3.启动 kube-scheduler
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler

五：验证 master 节点功能

以上是“kubernetes中Master节点如何安装与配置”这篇文章的所有内容，感谢各位的阅读！希望分享的内容对大家有帮助，更多相关知识，欢迎关注创新互联行业资讯频道！

新闻名称：kubernetes中Master节点如何安装与配置-创新互联
当前链接：http://lswzjz.com/article/dohpjc.html